ARTDESHINE Graphene Detailer Concentrate – 200ml

Description ArtDeShine Graphene Detailer is a water-based quick detailer dispersed with Reduced Graphene Oxide designed for quick and easy application, saving you time and effort.  A special blend of siloxane gives it coating-like properties while Reduced Graphene Oxide adds more protection against corrosion. This product gives a slick and smooth finish on surfaces. Works on dry and damp surfaces. A suitable product to supplement and maintain ArtDeShine Nano Graphene Coating Works on surfaces with or without coatings, sealants or waxes. PLEASE NOTE – This product is supplied as a concentrate and can be diluted down 9:1 (as per our ready-to-use product).  It can be used as a concentrate directly onto the surface to provide even more protection however please treat it more like a spray-on coating rather than a quick detailer. Directions (For Concentrated Product): Use a lightly dampened microfibre and spray the product onto the microfibre Spread onto the panel and remove with a separate, dry microfibre Ensure no product residue remains on the surface. If the ambient temperature is too hot and streaking and shadowing start to occur, either use the coating again on the area and wipe off right away (it uses the solvents to take the high spots off) or use a damp towel to remove streaks then buff with a dry towel. Allow to cure for 24 hours (can be layered after 4-6 hours) Directions (For Diluted Product): Spray ONTO Microfibre cloth to spread onto the surface. Buff off with dry microfibre cloth Ensure no product residue remains on the surface. Suitable for all surfaces.  Shake gently before use. (any small particles floating in the detailer are normal and will not affect performance)